Customized polished Titanium alloy shot
Titanium alloy refers to a variety of alloy metals made of titanium and other metals. Titanium is an important structural metal developed in the 1950s. Titanium alloys have high strength, good corrosion resistance and high heat resistance. From the 1950s to 1960s, the main focus was the development of high-temperature titanium alloys for aero-engines and structural titanium alloys for airframes.
A number of corrosion-resistant titanium alloys were developed in the 1970s. Since the 1980s, corrosion-resistant titanium alloys and high-strength titanium alloys have been further developed. Titanium alloy is mainly used for the production of aircraft engine compressor components, followed by the structural parts of rockets, missiles and high-speed aircraft
Titanium is a new type of metal. The performance of titanium is related to the content of impurities such as carbon, nitrogen, hydrogen, and oxygen. The purest titanium iodide has an impurity content of no more than 0.1%, but it’s strength is low and plasticity is high. The performance of 99.5% industrial pure titanium is: density ρ=4.5g/cm3, melting point of 1725℃, thermal conductivity λ=15.24W/(mK), tensile strength σb=539MPa, elongation δ=25%, and section shrinkage Rate ψ=25%, elastic modulus E=1.078×105MPa, hardness HB195.
Advantages of titanium alloy.
High strength, high thermal strength, good corrosion resistance, good low temperature performance, high chemical activity, low thermal conductivity.
My clients Y from Koreae, offer me a drawing, firstlt I recomedn tungsten alloy, as you know, tungsten alloy would be the best for weapons, but my clients insitst use Titanium. He said, America low tungsten is not allowed to using as military weapon. Tungsten alloy can only use for hunting and other civilian aplication. Well, Y left me a problem which beyound my knowledge. Based his requirements, then I have made a call to our prominent professor which is focus in military reasearch. Then my professor gave me an option Ti-6Al-4V, which called TC4, confirmed material then I talk to the raw material supply, after reaching then I made a conclusion, TC4 is the best choice. The I talk to Y. Once we confirmed, then I bought raw material, cnc machinning.. In the end, it turns out like this. As you see attached picture. After testing, it was very good. If you want the shoot detail. Please visit the link. That Y offered to me.
Tungsten Carbide Products
All Categories
- Ground Solid Tungsten Carbide Rods
- Unground Solid Tungsten Carbide Rods
- Tungsten Carbide Rods Single Hole
- Tungsten Carbide Rods Double Holes
- Nonstandard Tungsten Carbide Rods
- Tungsten Carbide Bars And Strips
- Tungsten Carbide Plates
- Customized Tungsten Carbide Products
- Tungsten Carbide Burr Blank
- Pure Tungsten & Tungsten alloy Weights
- Tungsten Carbide Studs for HPGR Rolls
- Copper Tungsten Products
- Tungsten Carbide Bearing Ball