Tungsten Carbide Plates
Tungsten carbide plates are one of the many materials made of tungsten carbide, which are produced by metallurgical methods of powdering, ball milling, pressing and sintering. The content of WC and Co in tungsten steel plates for different applications varies, and they are used in a wide range of applications and have excellent hardness, high hardness, good wear resistance, high modulus of elasticity, high compressive strength, good chemical stability (resistance to acids, alkalis and high temperature oxidation), low impact toughness, low coefficient of expansion, and thermal and electrical conductivity similar to that of iron and its alloys.
Introduction to Cemented Carbide Plates
Tungsten carbide plate is also an excellent material for making high temperature resistant parts, wear resistant parts, anti-shielding parts and corrosion resistant parts. When using tungsten carbide plates, the appropriate material should be selected according to the application.
Cemented Carbide Plate Details Applications
Tungsten carbide plates have excellent hardness, high hardness, good wear resistance, high modulus of elasticity, high compressive strength, good chemical stability (acid, alkali and high temperature oxidation resistance), low impact toughness, low coefficient of expansion, thermal and electrical conductivity similar to that of iron and its alloys. In just fifty years, the use of tungsten carbide turning tools has increased metal cutting speeds by a factor of two hundred, from ten metres per minute to over two thousand metres per minute. The heat-resistant tungsten carbide still retains good elasticity and mechanical strength and is generally used for thicker cuts, interrupted cuts and poor part clamping. The coating gives good results in all types of materials up to HRC 50°. 1 to 2 times longer service life and excellent impact resistance compared to normal tungsten carbide.
Tungsten carbide plate production process
Powder→formulation according to application requirements→wet grinding→mixing→crushing→drying→sieving→then adding forming agent→drying again→sieving to make the mixture→granulating→ pressing→forming→sintering→forming (blank)→flaw inspection→packaging→warehousing.
Cemented carbide sheet has excellent warp hardness, high hardness, good wear resistance, high modulus of elasticity, high compressive strength, good chemical stability (resistance to acids, alkalis, high temperature oxidation), low impact toughness, low coefficient of expansion, thermal and electrical conductivity similar to that of iron and its alloys. Silicon steel sheet, cold rolled sheet, suitable for making drawing dies, wear resistant parts and die cores for stamping accessories and carbide automatic presses, etc., using good strength and impact toughness, lower wear resistance than the above alloys. Top forging dies for large loads, such as those used for screws, rivets, etc., also for stamping dies. Extrusion dies. Punching and cutting dies etc.



Tungsten Carbide Products
All Categories
- Ground Solid Tungsten Carbide Rods
- Unground Solid Tungsten Carbide Rods
- Tungsten Carbide Rods Single Hole
- Tungsten Carbide Rods Double Holes
- Nonstandard Tungsten Carbide Rods
- Tungsten Carbide Bars And Strips
- Tungsten Carbide Plates
- Customized Tungsten Carbide Products
- Tungsten Carbide Burr Blank
- Pure Tungsten & Tungsten alloy Weights
- Tungsten Carbide Studs for HPGR Rolls
- Copper Tungsten Products
- Tungsten Carbide Bearing Ball