>All Products>Customized Tungsten Carbide Products

Tungsten carbide twisted drawing die for spiral rib wire

【Item】Tungsten carbide twisted drawing die for spiral rib wire

【Grade】YG6/YG8 tungsten cabride

【Dimension】D7.6

【Specification】According to customer requirement

【Density】14.5~14.7g/cm³,

【Brand】HAO Carbide

【Country of Origin】ZhuZhou,China

【Usage】Drawing of ferrous metals, large size wire

E-mail This Page Submit Your Inquiry

Product info

Tungsten Cememted Wire drawing dies are widely used in electronic devices, radar, television, instruments, aerospace and other industries above high-precision wire, as well as applications in tungsten wire, molybdenum wire, stainless steel wire and other industries of wire drawing dies. Secondly wire and cable wires and various alloy wires are drawn using diamond wire drawing dies.

The working principle of a wire drawing die is to gradually bring the wire from coarse to fine to the required size of the die. This particular die is a wire drawing die. The drawing die stamp is usually made of natural and artificial diamonds (artificial diamonds include ge, pcd, synthetic materials, etc.). Copper drawing dies are soft drawing dies. There are also hard wire drawing dies, such as tungsten wire drawing. Copper wire drawing die compression zone angle is generally 16-18 degrees, the fixed length of 30-40%, while tungsten wire drawing die compression zone angle is relatively small, generally 12-14 degrees, the fixed length of 60-70%.
Diamond wire drawing dies are made of natural diamond, so they come with diamond drawing dies. They are highly resistant to abrasion and have a long service life. The production process for drawing die inserts consists of pressing, drawing dies and turning.

Grade of Tungsten carbide wire drawing dies

_Grade	_Density_g/cm³	_Strength_MPa	_Hardness_HRA	_Applications
_YG6X	_14.95	₁₈₀₀	_91.5	_{Suitable for making drawing dies with bore less than ¢6.00mm.}
_YG6	_14.95	₁₉₀₀	_90.5	_{Suitable for making drawing dies for non-ferrous round bars with bore less than ￠20.00mm and tubes with bore less than ￠10.00mm.}
_YG8	_14.8	₂₂₀₀	_89.5	_{Drawing dies for the production of round bars and tubes of steel and non-ferrous metals.}
_YG10	_14.5	₂₄₀₀	_88.5
_YG15	₁₄	₂₈₀₀	₈₇	_{For drawing steel bars and tubes with high shrinkage.}