Wolfram cemented carbide studs for HPGT
Tungsten carbide studs also called cemented carbide studs, carbide buttons and carbide tips, It's widely used for high pressure grinding roller.
High Pressure Grinding Roller is an energy-efficient crushing equipment of new technologies. High performance of carbide stud extends the life of High-Pressure-Grinding-Roller. HAO Carbide provides quality carbide studs with good wear resistance and high compressive strength, which can satisfy the requirements of different conditions.
As the core part of vertical impact crusher (sandstone equipment ), Carbide stud is widely used in mining, sand and gravel, cement, metallurgy, hydropower engineering and other industries, aiming at these behaviors that need to withstand high-speed impact and strong wear resistance, using cemented carbide is an ideal choice.
E-mail This Page Submit Your Inquiry
Product info
Why choose our cemented carbide studs?HAO Carbide located in Zhuzhou, Founded in 2009, manufacturing carbide stud for over 5 years.
Our main product, be in charged by chief engineer, through strict quality monitoring from powder to shipping (HAO Carbide has been manufacturing tungsten carbide products for 12 years, carbide studs is our most advantage products)
Using automatic TPA compression molding, Monthly production capability of our factory could reach twenty tons.
Reliable quality,Using HIP low pressure sintering to ensure the consistency and compactness of tungsten carbide studs.
100% automatic full inspection, Tolerance could reach to 0~0.005, High polish, surface roughness could reach to Ra0.2
With good wear resistance and high compressive strength, Our carbide studs were trusted by our clients.
Tungsten Carbide Studs for HPGR Rolls Tags
Carbide Rod For Make Cutting Tools, Military Tungsten Rods, Pure Tungsten Rods,Product Dispaly
Specifications
Cemened carbide Studs Main Technical Parameters
|
Grade |
Pysical Properties |
Tolerance |
||
|
Hardness(HRA) |
Bending Strength (≥N/mm2) |
Density (g/cm3) |
||
|
YG15XC |
85.0~87.0 |
2500~2800 |
13.90~14.10 |
±0.005 |
|
YG20X |
86.0~88.0 |
2850~3150 |
13.40~13.60 |
±0.005 |
|
YG15X |
87.0~89.0 |
2800~3100 |
13.95~14.15 |
±0.005 |
Recommended Products
All Categories
- Ground Solid Tungsten Carbide Rods
- Unground Solid Tungsten Carbide Rods
- Tungsten Carbide Rods Single Hole
- Tungsten Carbide Rods Double Holes
- Nonstandard Tungsten Carbide Rods
- Tungsten Carbide Bars And Strips
- Tungsten Carbide Plates
- Customized Tungsten Carbide Products
- Tungsten Carbide Burr Blank
- Pure Tungsten & Tungsten alloy Weights
- Tungsten Carbide Studs for HPGR Rolls
- Copper Tungsten Products
- Tungsten Carbide Bearing Ball