Tungsten carbide rod with one straight hole

Tungsten carbide rod with one straight hole

Physical property of tungsten carbide rod with one hole
【Dimension】Φ5.0x3.2x80mmmm
【Requirements】h6,high polish

【Co】10%
【WC】90%
【Hardness】92.1HRA
【Density】14.5g/cm3
【Bending Strength】3900N/mm2
【Grain Size】0.7μm

E-mail This Page Submit Your Inquiry
Product info

Advantage of tungsten carbide rod with one hole

1. High hardness: using ultra-fine grain size tungsten carbide, the hardness can reach up to HRA93.6;
2. Good strength: the highest strength can reach 4000N/mm²;
3. Complete size specifications: the smallest bar diameter can reach 0.025mm; the longest length can reach 1000mm;
4. High precision: the bar diameter tolerance can reach ±0.001mm;
5. High straightness: the straightness of finely ground bars can reach ±0.02mm; 6. High concentricity: the concentricity of single-hole bars can reach up to ±0.005mm after fine grinding;
7. The tolerance range of the inner hole: the tolerance of the inner hole diameter of the single-hole bar is ±0.1mm; the tolerance of the inner hole diameter <1mm is ±0.05mm;

 

Tungsten Carbide Rods Single Hole Tags
Carbide Rod Spain, Tungsten Carbide Rods For Sale, Tungsten Rod Holder,
Product Dispaly
Specifications
Cemented Carbide Grade JZ06U JZ08U JZ12U JZ12U-T JZ10S JZ10F
WC 94 92 88 88 90 90
CO 6 8 12 12 10 10
GRAIN SIZE μm 0.4 0.4 0.4 0.4 0.6 0.8
DENSITY G / c m³ 14.85 14.65 14.25 14.20 14.40 14.40
HRD H R A 94.0 93.6 92.5 93.0 92.1 91.8
TRS N / m m² ≥4000 ≥4000 ≥3800 ≥3800 ≥3800 ≥3800


GRADE The Grade Recommend
JZ06U This tungsten carbide rod is with 0.4μm ultrafine particles and CO 6%. Be suitable for processing aluminum- magnesium alloy, glass fiber, carbon fiber, wood, hard plastic, etc. Recommend for making micro tools and drills.
JZ08U This tungsten carbide rod is with 0.4μm ultrafine particles and CO 8%. Be suitable for processing resin, wood, titanium alloy, stainless steel, copper-aluminum alloy, composite material. Recommend making high speed drill, end mill, graver and micro-drill PCB with diameter less than 0.8mm.
JZ12U This tungsten carbide rod is with 0.4μm ultrafine particles and CO 12%. Be suitable for semi-finishing and finishing process of stainless steel, mold steel and normal titanium alloy, etc. Recommend for making all types of high speed end mills, reamers and gravers.
JZ12U-T This tungsten carbide rod is with 0 . 4 μ m ultrafine particles and CO 12 %, higher hardness . Be suitable for finishing process of stainless steel , mold steel and normal titanium alloy , etc . Recommend for making all types of high speed end
JZ10S This tungsten carbide rod is with 0 . 6 μ m Sub - micron particles and CO 10 %, which is widely used in cutting tools . Be suitable for rough finishing , semi - finishing and finishing of mold steel , grey cast iron , austenitic stainless steel and heat - resistant alloy . Recommend for making normal drill and end mill
JZ10F This tungsten carbide rod is with 0 . 8 μ m Sub - micron particles and CO 10 %. Be suitable for rough finishing and semi - finishing of normal steel , cast iron and stainless steel . Recommend for making normal drill and end mill


Be processed material Suitable grand
First chioce Wear-resisting High toughness High toughness
Low-alloy steel(intensisty700 N/mm²) J Z 1 0 S J Z 5
Alloy steel(intensisty700 N/mm²) J Z 1 0 S J Z 5 J Z 5
Stainless steel J Z 1 0 S J Z 5
Csst iron J Z 0 6 U
Aluminum alloy,Copper,Plastic J Z 0 6 U J Z 5
Graphite JZ06U+COATING
Titanium alloy,Heat-resisting alloy J Z 1 0 S J Z 5
Hardened steel(hardness? 60HRC) J Z 1 2 U J Z 1 2 U - T
Reamer J Z 0 6 U
Flushes the needle,Drift,Mold J Z 1 0 F
PCB drill bit,Aluminum/copper sheet J Z 0 6 U
Drill bit J Z 1 0 S J Z 5


Recommended Products