Tungsten Carbide Plates

Tungsten carbide plates are also named as tungsten carbide sheets, square plates, flat stock, and flat bars. They are made from tungsten carbide, which is harder than many materials in terms of corrosion resistance and wear resistance. So they can be used in woodworking, metal machining, and molding industry. All our carbide plates have been stress-relieving HIP sintered in order to gain resistance to corrosion, pitting and cracking commonly experienced during machining....

Molybdenum crucible called Moly crucible for industry

The molybdenum crucible also called Moly crucible, which is produced using Mo-1 molybdenum powder and is used at temperatures from 1100°C to 1700°C. It is mainly used in the metallurgical industry, rare earth industry, monocrystalline silicon, solar energy, artificial crystals and mechanical processing....

Tungsten carbide stirps or cemented carbide strips

Carbide strips are referring the rectangular tungsten carbide rod, also known as tungsten carbide flats.It is produced by the same way as carbide rod, through powder(Mainly WC and Co powder as per formula) mixture, ball milling, spray tower drying, extruding, drying, sintering, (and cutting or grinding if necessary) final inspection, packing, then delivery, middle inspection is done after each process to make sure only the qualified products can be moved to next production process....

hpgr tungsten cemented carbide studs for High Pressure Grinding Roller

Tungsten carbide studs also called cemented carbide studs, carbide buttons and carbide tios. which is widly used for high pressure grinding roller. High Pressure Grinding Roller is an energy-efficient crushing equipment of new technologies. High performance of carbide stud extends the life of High-Pressure-Grinding-Roller. HAO Carbide provides quality carbide studs with good wear resistance and high compressive strength, which can satisfy the requirements of different conditions. As the core part of vertical impact crusher (sandstone equipment ), Carbide stud is widely used in mining, sand and gravel, cement, metallurgy, hydropower engineering and other industries, aiming at these behaviors that need to withstand high-speed impact and strong wear resistance, using cemented carbide is an ideal choice. ...

Customized polished Titanium alloy shot

Titanium alloy refers to a variety of alloy metals made of titanium and other metals. Titanium is an important structural metal developed in the 1950s. Titanium alloys have high strength, good corrosion resistance and high heat resistance. From the 1950s to 1960s, the main focus was the development of high-temperature titanium alloys for aero-engines and structural titanium alloys for airframes....

Copper tungsten alloy products

Tungsten and copper alloy. Commonly used alloys contain 10% to 50% copper. The alloy is prepared by powder metallurgy, which has good electrical and thermal conductivity, good high-temperature strength and certain plasticity. At very high temperatures, such as above 3000°C, the copper in the alloy is liquefied and evaporated, absorbing a large amount of heat and reducing the surface temperature of the material. So this kind of material is also called metal sweating material....

Tungsten alloy heavy metals with high density

Tungsten alloy is a kind of alloy based on tungsten (85% ~ 99% tungsten content) and added with a small amount of Ni. Cu, Fe. Co. Mo, Cr and other elements. Its density is as high as 16.5 ~ 18.75g/ cm³, commonly known as high specific gravity alloy, heavy alloy or high density tungsten alloy....

Tungsten cemented carbide ball blank

Tungsten cemented carbide ball with high hardness and high strength. Its alloy composition is mainly tungsten carbide WC and cobalt, and also contains a very small amount of iron, nickel and other metal components. It is resistant to acid and alkali and does not rust. It has a wide range of uses. It can be used as a ball for high-end bearings, fish sinkers for fishing rods, ball valves in petroleum valve pumps, and cemented carbide measurement on inspection instruments. The wear-resistant parts of the instrument and other high-precision machinery with high requirements. ...

Small tungsten cemented carbide ball for ball point

Cemented carbide balls mainly include rough balls, fine grinding balls, punching balls, bearing balls, valve balls, non-magnetic balls, Monel balls, through-hole balls, metering balls, color-scraping balls, pen balls, etc. ...